Author Topic: Finished G36/.22lr build  (Read 7122 times)

0 Members and 1 Guest are viewing this topic.

Offline MnStrkTom

  • Full Member
  • ***
  • Posts: 10
  • What's the worst that could happen!
Finished G36/.22lr build
« on: August 28, 2008, 10:36:56 AM »
I just finished my Classic Army G36/.22lr rifle. Before I started this I had no idea how real this rifle looks and feels when finished. I haven't handled any other make besides the Classic Army but let me tell you, it is worth the extra money. The CA body definitely makes this feel like a real firearm. I wanted this to look like and function as real as possible so I took the extra steps, and time to make it work. I used the Mossberg 702 mostly due to price and size. I picked up 2 new ones at Dicks sporting goods for $90 apiece. It is also thinnner than a 10/22 so I figured it would work for other projects. I Heavily modified the 702 receiver and trigger pack. The 702 was purchased exclusively for this project so I wasn't too worried about modifying it. The 702 trigger guard was completely removed so I could keep the G36 trigger guard intact. The top right side of the receiver where the cocking handle needed to slide was also filed down to smooth everthing out. I went a different route in mating the 702 to the G36. I used some 1.25" aluminum square tube to make a housing for the 702 receiver. The 702 has 2 mounting screws located underneath it, so I used these to mount it in the aluminum frame. The frame is then held inside the G36 by means of 2 sex bolts, which can be seen in the pic. This is a 100% solid mount. The only problem I am still working on is the safety. The 702 safety lines up perfectly with the takedown hole for the G36 trigger group and magwell. Still trying to figure out a way to get something in there to work the safety without cutting the hole and making it finger accessible. I was going to drill through the 702 safety button and a machine screw through it with springs and nuts on either side but the metal is too hard for a drill bit to penetrate.
 
here it is
 

 
I modified the existing cocking handle assembly so it would work for the .22 bolt
 

 
I put a small machine screw through the trigger guard and magwell with a spring and nut so I could work the 702 mag release. Just push forward on the screw and mag pops out.
 

 
I filled in some of the bottom of the mag with spray foam and then filled the rest with fiberglass resin to mate the 702 mag into the G36 mag.
 



I am trying to fing a reasonably priced King arms airsoft silencer to add to the front.
Freedom is a sacrifice the protected will never know.

Offline MrNuke

  • YaBB Administrator
  • God Member
  • *****
  • Posts: 559
  • Modding is in my blood.
Re: Finished G36/.22lr build
« Reply #1 on: August 28, 2008, 10:27:33 PM »
Wow, very nice and clean. Good job. Since a perma job, I'd say cut a small opening for the serial # of the original receiver to show through so you don't have to take it apart to prove what's inside if anyone ever asks you, but that is nice..  ;)
AK74 Bullpup 5.45x39
Various AR-15 variants
GSG-5 .22lr
Clones :
HK G36C
PS90

"Be prepared to get FU$%ED by the long DI$% of the LAW."

Offline MnStrkTom

  • Full Member
  • ***
  • Posts: 10
  • What's the worst that could happen!
Re: Finished G36/.22lr build
« Reply #2 on: August 29, 2008, 10:37:21 AM »
Thanks. You know, I did think about engraving the #'s to the bottom of the trigger guard so I didn't have to cut a hole.
Freedom is a sacrifice the protected will never know.

Offline pauletteoi18

  • Newbie
  • *
  • Posts: 1
  • Custom for life.
Re: Finished G36/.22lr build
« Reply #3 on: September 06, 2017, 12:45:08 PM »
 My new photo blog
http://asslick.photo.erolove.in/?post-meadow
 xxxxfree tube porn reportable quantity for vinyl methyl ether see webcam porn gratuit high school party bo burnham lyrics kelly hu nude



Share me

Digg  Facebook  SlashDot  Delicious  Technorati  Twitter  Google  Yahoo
Smf

 

Anyonein Upstate NY starting a build?

Started by luvsdonuts

Replies: 5
Views: 2361
Last post July 13, 2008, 09:24:57 PM
by karbo
Getting Started With My Build

Started by panthrosan

Replies: 5
Views: 3276
Last post June 27, 2008, 09:15:38 PM
by Fledermaus
Anyone looking to build a 10/22 Thompson?

Started by wilit

Replies: 5
Views: 3772
Last post January 25, 2009, 02:51:33 PM
by MrNuke
New P90 / PS90 build

Started by MrNuke

Replies: 26
Views: 33474
Last post September 06, 2017, 03:09:49 AM
by christophergb11
New Build

Started by FOXONE

Replies: 16
Views: 6095
Last post March 24, 2008, 04:31:12 AM
by menace